Remote Switch: Service and Repair

Remove
1. Remove steering wheel pad.
2. Vehicles with SRS: Remove drivers air bag module.







3. Disconnect steering wheel switch multiplug.
4. Remove 2 screws securing multiplug to horn unit.
5. Remove 3 screws securing printed circuit to horn unit.


CAUTION: The 3 screws securing the printed circuit to horn unit are not replacable, if damaged during removal a new steering wheel must be fitted. Do not attempt to use other fixings.


6. Lift 2 clips securing each switch pack. Remove switch packs and printed circuit assembly.

Refit
7. Reverse removal procedure.