Rear Wiper Motor

Rear Window Wiper Motor

Service Repair No - 84.35.12

Remove
1. Disconnect battery negative lead.
2. Remove rear door trim panel.
3. Remove spare wheel.





4. Remove wiper arm and grommet.
5. Remove nut, plain washer and seal from drive spindle.
6. From inside the door, disconnect wiper motor leads from door harness at multi-plug.
7. Remove bolts securing wiper motor mounting bracket and negative lead to inner door panel.
8. Withdraw motor spindle from outer door panel and maneuver wiper motor from door casing complete with the spindle spacer.





9. Remove two rubber mounted nuts securing mounting bracket to motor and detach bracket.

Refit
10. Reverse removal procedure. 1 to 9.

NOTE: If a replacement wiper motor assembly has been fitted, before fitting the wiper arm. Reconnect battery negative lead. Operate wiper motor to ensure that motor spindle is in park position.