Blower Motor Switch - Rear

Blower Motor Switch - Rear

Remove
1. Open rear door.
2. Release switch pack from headlining panel.







3. Disconnect 2 multiplugs and 2 Lucars from [1][2]switch pack.
4. Remove [1][2]switch pack assembly.







5. Remove blower motor control knob.
6. Release 3 tags securing [1][2]switch pack display panel and remove panel.
7. Remove switch position illumination mask.
8. Release 3 tags securing blower motor switch to [1][2]switch pack.
9. Remove blower motor switch.

Refit
10. Fit blower motor switch and secure to tags.
11. Fit switch position illumination mask.
12. Fit display panel and secure to tags.
13. Fit blower motor control knob.
14. Position [1][2]switch pack assembly, connect multiplugs and Lucars and secure to headlining panel.
15. Close rear door.