Remove and Refit Steering Wheel
Removal1. Remove driver's airbag module. Service and Repair
2. Position steering wheel so the road wheels are in the straight ahead position.
3. Disconnect cruise control switch connector (where fitted) from rotary coupler harness.
4. Release harnesses tram clip on steering wheel.
5. Remove steering wheel nut.
6. Release steering wheel from column.
7. Feed harnesses through hole in steering wheel.
8. Remove steering wheel.
CAUTION: Prevent rotation of rotary coupler once steering wheel is removed. Secure in position with adhesive tape.
Installation
9. Reverse removal procedure.
CAUTION: Ensure road wheels are straight I ahead before fitting steering wheel.
10. Fit steering wheel ensuring the rotary coupler lugs are correctly engaged.
11. Fit steering wheel nut. Tighten to 5O Nm.
12. Refit driver's airbag module. Service and Repair