Sunroof Assembly - Electrical, Front and Rear

Sunroof Assembly - Electrical, Front and Rear

Remove

Sunroof Components:

1. Ensure sunroof is in normally closed position.
2. Disconnect battery negative lead.
3. Remove headlining.
4. Disconnect electric motor wiring plug.
5. Remove screws and detach electric motor from clamping frame.
6. Disconnect drain tubes from each side of clamping frame.
7. Remove 13 fixings and remove clamping frame from upper frame.
8. Remove upper frame assembly.

Refit
9. Position upper frame assembly into roof aperture.
10. Locate clamping frame and reconnect drain tubes.
11. Loosely fit screws, centralise upper frame and clamping frame assemblies and then tighten screws.
12. Reverse removal procedure.