Malfunction Lamp / Indicator: Service and Repair

SRS WARNING LIGHT BULBS

REMOVE


1. Remove instrument panel.





2. Remove window and face plate from instrument panel.





3. Remove 3 screws securing circuit board (6) to instrument panel.
4. Release and remove small cover from circuit board.
5. Disconnect multiplug from circuit board.
6. Remove circuit board.





7. Remove 4 screws securing tachometer.
8. Remove tachometer.





9. Carefully remove 2 screws securing face plate to tachometer.
10. Release warning light housing from tachometer circuit board.
11. Carefully (to avoid damage to tachometer needle and spindle), tilt and remove warning light housing.
12. Remove 2 warning light bulbs.


REFIT
1. Reverse removal procedure.
2. Fit new warning light bulbs.
3. Carefully fit warning light housing, ensuring that locating pegs engage correctly and that retaining clips lock housing into position.
4. Ensure that tachometer needle is on the correct side of its stop.
5. Fit instrument panel.