Disassemble

Throttle Linkage:

1. Spherical bush/housing
2. Retaining clips (2)
3. Countershaft assembly
4. Overtravel spring
5. Throttle shaft nut
6. Throttle return spring (2)
7. Tab washer
8. Throttle stop lever
9. Throttle bracket assembly
10. Pop rivets (2)

REMOVE
1. Remove plenum chamber. Intake Air Plenum
2. If fitted, unclip cruise control actuator link. Hold throttle fully open, release link from countershaft assembly. Carefully return lever assembly to close throttle.

Throttle Lever:

3. Release tension on inboard throttle spring.
4. Bend back lock washer tabs.
5. Hold throttle stop lever in closed position, release nut from throttle shaft.
6. Release tension on outboard throttle spring.
7. Remove overtravel spring.

Throttle Linkage:

8. Remove three bolts securing throttle bracket to plenum chamber, withdraw bracket assembly.
9. Remove tab washer and throttle stop lever from throttle shaft.