Security Code Instructions

Security Code Instructions

1. Obtain 5-digit security code from vehicle owner or manufacturer.

2. Enter the code number using the Radio (Z111) push-button selectors.

Note: If the correct code is not entered in 3 successive attempts, the Radio (Z111) will not accept another entry until the Radio has been left on for one hour with the ignition on.

Note: When entering the code, be sure to complete the entire sequence numbering of that 5-digit code even if you make a mistake. For example, if the correct code sequence is 43215 and you mistakenly enter 42 instead of 43, continue the code number sequence of 215 to complete that entry. A 'beep' will sound, 'code' will still be displayed and the Radio will not operate. Re-enter the correct code 43215 and the Radio will operate.

Note: If an audible 'beep' is heard while entering the code, STOP immediately! Begin entering the code again, starting with the first number of the 5-digit code.

Note: If a push-button is touched accidentally when the ignition is off, a warning tone will sound. Turn the ignition on and the tone will stop.