Front Door Panel: Service and Repair
REMOVE1. Disconnect the battery negative terminal.
2. Remove the screw securing the handle surround.
Handle Surround:
3. Remove the surround.
Locking Button:
4. Carefully pry the sill locking button surround from the trim panel.
Door Pull:
5. Remove the two finisher buttons from the bottom of the door pull pocket to reveal the securing screws.
6. Remove the screws and withdraw the pocket from the trim panel.
7. Using a taped screwdriver, carefully pry the trim panel away from the door.
NOTE: Support the trim panel while the speaker leads are disconnected.
8. If necessary the stowage bin front panel can be removed by releasing the screws at the rear of the trim panel.
REFIT
1. Reverse the removal procedure.