Repair Procedures

REMOVAL

1. Remove the engine cover(A).




2. Disconnect the front oxygen sensor connector.
3. Remove the front muffler heat protector(A).

Tightening torque :
7.8 - 11.8N.m (0.8 - 1.2kgf.m, 5.8 - 8.7lb-ft)


4. Remove the front muffler(B).

Tightening torque :
29.4 - 39.2N.m (3.0 - 4.0kgf.m, 21.7 - 28.9lb-ft)





5. Remove the stay(A) of the exhaust manifold and catalytic converter assembly.

Tightening torque :
Bolts(B) : 34.3 - 39.2N.m (3.5 - 5.5kgf.m, 25.3 - 28.9lb-ft)
Bolts(C) : 29.4 - 39.2N.m (3.0 - 5.5kgf.m, 21.7 - 28.9lb-ft)





6. Remove the heat protector(A).

Tightening torque :
16.7 - 21.6N.m (1.7 - 2.2kgf.m, 12.3 - 15.9lb-ft)





7. Remove the exhaust manifold and catalytic converter assembly(A).

Tightening torque :
17.7 - 24.5N.m (1.8 - 2.5kgf.m, 13.0 - 18.1lb-ft)





8. Installation is in the reverse order of removal