Installation

SHIFT LEVER

INSTALLATION
1. Install the retainer (A) and the nuts (B).





NOTE
In case, install the crush pad and cowl cross bar.

2. Install the shift lever assembly (A).





3. Install the sport mode connector (A).





4. Install the shift cable (A) and the wire (B) to the shift lever assembly.





CAUTION
Install the shift cable to the transaxle assembly before installing the shift cable to the shift lever assembly.

5. Install the air duct (A).





6. Install the center console.
7. Install the shift cable to the transaxle assembly. (refer to Automatic transaxle's Installation)

TORQUE : 8-12 Nm (0.8-1.2 kgf.m, 5.8-8.6 lb-ft)