Replacement

1. Align the stabilizer bracket bushing with the positioning line on the stabilizer bar.

2. Install stabilizer bracket and tighten mounting.
Tightening torque: 32 - 45 ft. lbs. (43 - 61 Nm)

3. Tighten the control-link bolt on the control-link bracket of the suspension assembly.
Tightening torque: 32 - 45 ft. lbs. (43 - 61 Nm)

4. Tighten the control-link nut on the stabilizer bar.
Tightening torque: 32 - 45 ft. lbs. (43 - 61 Nm)

NOTICE: Tighten control-link bolt and nut to specified torque before lowering vehicle (unload condition).