Steering Mounted Controls Assembly: Service and Repair

Steering Wheel Audio Controls
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal

NOTE:
Removal steps in this procedure may contain installation details.

NOTE:
The steering wheel is shown removed for clarity.
For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect
For additional information, refer to Driver Air Bag Module Driver Air Bag Module





Torque to: 2 Nm





NOTE:
The procedure must be carried out on both sides.





Torque to: 2 Nm





CAUTION: Take extra care not to damage the edges of the component.









Installation
1 To install, reverse the removal procedure.