Front Outer Parking Aid Sensor

Front Outer Parking Aid Sensor

Removal
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.
2 Remove the headlamp assembly. For additional information, refer to Headlamp Assembly Service and Repair




3 Remove the parking aid sensor.
- Disconnect the electrical connector.
- Release the 2 clips.

Installation
1
CAUTION: If a new sensor is installed, only the front face must be painted. Failure to follow this instruction may result in the component malfunctioning.
To install, reverse the removal procedure.