Front Inner Parking Aid Sensor

Front Inner Parking Aid Sensor

Removal

All vehicles
1
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.

Vehicles with 4.2L engine
2 Remove the front bumper cover. For additional information, refer to Front Bumper Cover - 4.2L

Vehicles with 5.0L engine
3 Remove the front bumper cover. For additional information, refer to Front Bumper Cover - 5.0L Service and Repair

All vehicles




4 Remove the parking aid sensor.
- Disconnect the electrical connector.
- Release the 2 clips.

Installation
1
CAUTION: If a new sensor is installed, only the front face must be painted. Failure to follow this instruction may result in the component malfunctioning.
To install, reverse the removal procedure.