Accelerator Pedal: Service and Repair

Accelerator Pedal

Removal





1
CAUTION: Removal of the clips is a delicate procedure, damage will occur if any force is used.
Remove the driver's side footwell trim panel.
- Carefully release the 3 clips.




2 Remove the throttle pedal assembly.
- Remove the 3 Torx screws.
- Disconnect the electrical connector.

Installation
1 Install the throttle pedal assembly.
- Connect the electrical connector.
- Install the Torx screws.
2 Install the driver's side footwell trim panel.
- Carefully align and secure the clips.