Fog/Driving Lamp Bulb: Service and Repair

Fog Lamp Bulb

Removal

NOTE:
Left-hand shown, right-hand similar.
1 Disconnect the battery ground cable. For additional information, refer to Specifications
2 Turn the steering on to full lock for access.




3 Release the front of the fender splash shield.
- Remove the 5 Torx bolts.
- Tie the splash shield aside.




4 Remove the front fog lamp bulb.
- Release and disconnect the electrical connector.

Installation
1 Install the fog lamp bulb.
- Connect and secure the electrical connector.
2 Install the fender splash shield.
- Tighten the Torx bolts.
3 Connect the battery ground cable. For additional information, refer to Specifications