Exhaust Manifold RH

Exhaust Manifold RH
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal
For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect
1 Raise and support the vehicle.
For additional information, refer to Catalytic Converter RH Catalytic Converter RH





Torque to: 12 Nm





Torque to: 48 Nm





CAUTION: Discard the bolt.

Torque to: 35 Nm





Torque to: 100 Nm





CAUTION: Discard the bolts.

NOTE:
Discard the gasket.

NOTE:
Make sure that the position of the spacers is noted before removal of the manifold.





NOTE:
Do not disassemble further if the component is removed for access only.

Installation





Torque to: 45 Nm





NOTE:
Install a new gasket.
1 Install the special tool.





NOTE:
If a new cylinder head is installed use the special tools in the illustration.
2 Install the special tool.





CAUTION: Make sure that new bolts are installed.

NOTE:
Install the spacers in the noted position.

Torque to: 10 Nm




3 Remove the special tool.





CAUTION: Make sure that new bolts are installed.

NOTE:
Install the spacers in the noted position.

Torque to: 10 Nm





Torque to: 18 Nm









Torque to: 12 Nm





Torque to: 48 Nm





CAUTION: Discard the bolt.

Torque to: 35 Nm





Torque to: 100 Nm
For additional information, refer to Catalytic Converter RH Catalytic Converter RH
For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect