Cooling System - Revised Radiator Splash Shield Service

NUMBER: JTB00157
(ISSUE 1)

MODEL XK

DATE 07 MAY 2009

SECTION: 501

New Workshop Procedure - Remove / Install Radiator Splash Shield

AFFECTED VEHICLE RANGE:
XK (X150) VIN: B00001 - Onwards
Model Year: 2007 - Onwards

CONDITION SUMMARY:

Situation:

The Workshop Manual procedure to remove / install the radiator splash shield has been revised. The vehicle is now placed on a four-post lift and the time for removing / installing the 21 Torx bolts has been reduced.

Action:

In the event it becomes necessary to remove / install the radiator splash shield, refer to the Repair Procedure outlined below.

PARTS:

No parts necessary; information only

TOOLS:

Refer to Workshop Manual (GTR) for any required special tools





WARRANTY:

NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer to DDW to obtain the latest repair time.

DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.

REPAIR PROCEDURE

REMOVE / INSTALL RADIATOR SPLASH SHIELD

NOTE:
Global Technical Reference (GTR) lookup sequence is as follows: GTR Home > NAS > X150 - XK > Service Information > Model Year > Workshop Manual > 5: Body and Paint > 501-02: Front End Body Panels

1. Refer to Workshop Manual (GTR) section 501-02: Front End Body Panels (76.22.90) to remove / install the radiator splash shield.