Seat Track

Seat Track

Removal
1 Remove the cover and disconnect the battery ground cable. For additional information, refer to Specifications
2 Make the SRS system safe. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering
3 Remove the front seat. For additional information, refer to Front Seat Removal and Replacement




4 Release the front seat backrest cover lower tension straps.




5 Remove the front seat cushion assembly.
- Release and disconnect the 2 electrical connectors.
- Release the Velcro strap.
- Release the 5 clips.




6 Remove the front seat safety belt pretensioner.
- Remove and discard the Torx bolt.
- Release and disconnect the electrical connector.




7 Release the seat module bracket.
- Disconnect the 4 electrical connectors.
- Release the 3 wiring harness clips.
- Remove and discard the cable tie.
- Remove the 4 Torx bolts.




8 Remove the seat track assembly.
- Remove and discard the 4 Torx bolts.

Installation
1 Install the seat track assembly.
- Tighten the new Torx bolts to 45 Nm (33 lb.ft).
2 Secure the seat module bracket.
- Tighten the Torx bolts to 10 Nm (7 lb.ft).
- Secure the harness with a cable tie.
- Attach the wiring harness clips.
- Connect the electrical connectors.
3 Install the front seat safety belt pretensioner.
- Connect and secure the electrical connector.
- Tighten the new Torx bolt to 45 Nm (33 lb.ft).
4 Secure the front seat cushion assembly.
- Connect and secure the electrical connectors.
- Secure the Velcro strap.
- Attach the clips.
5 Secure the front seat backrest cover lower tension straps.
6 Install the front seat. For additional information, refer to Front Seat Removal and Replacement
7 Connect the battery ground cable and install the cover. For additional information, refer to Specifications