Front Seat Recliner Motor

Front Seat Recliner Motor

Removal
1 Remove the cover and disconnect the battery ground cable. For additional information, refer to Specifications
2 Make the SRS system safe. For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering
3 Release the front seat cushion outer trim panel.
- Remove the 2 Torx screws.




4 Remove the front seat cushion outer trim panel.
- Release the 2 clips.
- Disconnect the electrical connector.




5 Remove the front seat hinge cover.
- Remove the 2 Torx screws.
- Remove the hinge cover retainer.
6 Remove the front seat backrest cover. For additional information, refer to Front Seat Backrest Cover Front Seat Backrest Cover




7 Remove the front seat backrest pad.
- Disconnect the electrical connector.




8 Release the front seat lumbar assembly.
- Release the 3 electrical connectors.
- Remove the clip.
- Disconnect the electrical connector.
9 Remove the front seat lumbar assembly.





10 Release the front seat recliner motor.
- Remove the front seat backrest shaft clip.
- Remove the front seat backrest shaft.





11 Remove the front seat recliner motor.
- Disconnect the electrical connector.
- Drill out the rivet.

Installation
1 To install, reverse the removal procedure.