Convertible Top Deck Lid Latch: Adjustments

Convertible Top Compartment Lid Latch, Over Center Bracket Setting Procedure
1 Set hydraulic pump to manual override.
2 Set ignition status to OFF.
3 Open the convertible top compartment lid to access the top fixing nut of the latch bracket on the right hand wheelhouse and slacken the nut.
4 Slacken the two lower fixing nuts of the latch bracket on the right hand wheel house, these can be accessed through the luggage compartment.
5 Position the mechanism to the fully over center position, then push the bracket forward until the cylinder is at it's shortest length, then release.
6 Tighten the two lower fixing nuts to 9 Nm, open the convertible top compartment lid and tighten the top fixing nut to 9 Nm.