Rear Quarter Trim Panel [2-Door]

Rear Quarter Trim Panel

Removal
1 Remove the rear seat backrest.




2
NOTE:
Release the forward edge first.
Remove the scuff plate trim panel.
- Release from the 4 clips.
3 Release the rear safety belt lower anchor.
- Remove and discard the Torx bolt.




4 Remove the rear quarter trim panel.
- Remove the 3 Torx bolts.
- Release from the 4 clips.
- Release the safety belt from the trim panel.

Installation
1 Install the rear quarter trim panel.
- Position the safety belt through the trim panel.
- Secure with the clips.
- Tighten the Torx bolts to 3 Nm (2.2 lb.ft).
2 Secure the rear safety belt lower anchor.
- Tighten the new Torx bolt to 45 Nm (33 lb.ft).
3 Install the scuff plate trim panel.
- Secure in the clips.
4 Install the rear seat backrest.