Rear Subframe Front Bushing

Rear Subframe Front Bushing

Special Service Tools






Forcing bolt

204-469





Remover support

204-479





Receiver-bush

204-481





Remover-bush

204-482





Support-bush

204-480





Installer-bush

204-483

Removal

All vehicles
1 Disconnect the battery ground cable.For additional information, refer to Specifications [1][2]Battery
2
CAUTION: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
Raise and support the vehicle.

Vehicles with 4.2L engine
3 Remove the rear subframe assembly. For additional information, refer to Rear Subframe - 4.2L

Vehicles with 5.0L engine
4 Remove the rear subframe assembly.For additional information, refer to Rear Subframe - 5.0L Service and Repair

All vehicles




5
NOTE:
Note the fitted position.
Using the special tools, remove and discard the rear subframe front bushing.

Installation

All vehicles




1
NOTE:
Align to the position noted on removal.
Using the special tools, Install the new front bushings.

Vehicles with 4.2L engine
2 Install the rear subframe. For additional information, refer to Rear Subframe - 4.2L

Vehicles with 5.0L engine
3 Install the rear subframe.For additional information, refer to Rear Subframe - 5.0L Service and Repair

All vehicles
4 Connect the battery ground cable. For additional information, refer to Specifications [1][2]Battery