Front Door Panel: Service and Repair

Front Door Trim Panel

Removal





1 Remove the exterior mirror trim panel.
- Release the 3 clips.
- Disconnect the electrical connector.




2 Release the front door trim panel.
- Remove the bolt cover.
- Remove the 3 Torx bolts.
- Release the 16 clips.




3
NOTE:
Do not disassemble further if the component is removed for access only.
Remove the front door trim panel.
- Release the front door interior handle cable.
- Disconnect the 2 electrical connectors.




4 Remove the front door latch remote control handle.
- Release from the 5 clips.




5 Remove the grab handle cover.
- Release from the 6 clips.




6 Remove the window control switch.
- Release from the 3 clips.
- Disconnect the electrical connector.




7 Remove the seat control switch.
- Remove the 4 Torx screws.
- Disconnect the electrical connector.

Installation
1 Install the seat control switch.
- Connect the electrical connector.
- Install and tighten the Torx screws.
2 Install the window control switch.
- Connect the electrical connector.
- Secure in the clips.
3 Install the grab handle cover.
- Secure in the clips.
4 Install the front door latch remote control handle.
- Secure in the clips.
5
CAUTION: Make sure that the cable remains correctly installed to the front door trim panel.
Install the front door trim panel.
- Attach the front door interior handle cable.
- Connect the electrical connectors.
6 Secure the front door trim panel.
- Secure in the clips.
- Tighten the Torx bolts to 10 Nm.
- Install the bolt cover.
7 Install the exterior mirror trim panel.
- Connect the electrical connector.
- Secure with the clips.
8 Check the operation of the door latch remote control handle.
- With the door closed, check the latch operation of the door latch remote control handle.
- With the door closed, check the lock operation of the door latch remote control handle.