Front Door Limiter: Service and Repair

Door Check Arm

Removal
1 Remove the front door trim panel. For additional information, refer to Front Door Trim Panel Service and Repair




2 Remove the window regulator motor.
- Disconnect the electrical connector.
- Remove the 3 Torx screws.




3 Release the front door inner weathershield.
- Disconnect the 3 electrical connectors.
- Release the 9 wiring harness clips.




4 Remove the front door inner weathershield.
- Remove the 12 Torx bolts.
- Release the front door interior handle cable.




5 Remove the door check-strap.
- Remove the 2 Torx screws.
- Remove the 2 nuts.

Installation
1 Install the door check strap.
- Tighten the Torx screws to 10 Nm (7 lb.ft).
- Tighten the nuts to 25 Nm (18 lb.ft).
2 Install the front door inner weathershield.
- Attach the front door interior handle cable.
- Tighten the Torx bolt to 10 Nm (7 lb.ft).
3 Secure the front door inner weathershield.
- Secure the wiring harness clips.
- Connect the electrical connectors.
4 Install the window regulator motor.
- Install and tighten the Torx screws.
- Connect the electrical connector.
5 Install the front door trim panel. For additional information, refer to Front Door Trim Panel Service and Repair