Installation

Engine
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary

NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.

NOTE:
If a new engine is to be installed, remove the intake manifold to access the top transmission retaining bolts.





NOTE:
This step requires the aid of another technician.
1 Install the engine assembly.





Torque to: 45 Nm









Torque to: 12 Nm





CAUTION: Install new o-ring seals

Torque to: 9 Nm













Torque to: 10 Nm





Torque to: 12 Nm





Torque to: 12 Nm
2 Lower the vehicle.









Torque to: 3 Nm





Torque to: 9 Nm





Torque to: 9 Nm













Torque to: 25 Nm

















For additional information, refer to Power Steering Fluid Reservoir - 5.0L Service and Repair
For additional information, refer to Secondary Bulkhead Panel LH - 5.0L/3.0L Diesel Secondary Bulkhead Panel LH
For additional information, refer to Secondary Bulkhead Panel RH - 5.0L/3.0L Diesel Secondary Bulkhead Panel RH
For additional information, refer to Transmission - 5.0L Installation
For additional information, refer to Cooling Fan Motor and Shroud - Vehicles Without: Supercharger Service and Repair
For additional information, refer to Hood Service and Repair
For additional information, refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging Air Conditioning (A/C) System Recovery, Evacuation and Charging
For additional information, refer to Cooling System Draining and Vacuum Filling Cooling System Draining and Vacuum Filling
For additional information, refer to Air Cleaner RH Air Cleaner RH
For additional information, refer to Air Cleaner LH Air Cleaner LH
For additional information, refer to Cowl Vent Screen Service and Repair
For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect