Headliner: Service and Repair

Headliner
This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary
Removal

NOTE:
Removal steps in this procedure may contain installation details.
For additional information, refer to Battery Disconnect and Connect Battery Disconnect and Connect
For additional information, refer to Interior Rear View Mirror Interior Rear View Mirror
For additional information, refer to Overhead Console Overhead Console
Remove both sun visors.
For additional information, refer to Sun Visor Service and Repair
Remove both A-pillar trim panels.
For additional information, refer to A-Pillar Trim Panel Pillar Trim
Remove both B-pillar upper trim panels.
For additional information, refer to B-Pillar Upper Trim Panel B-Pillar Upper Trim Panel
Remove both C-pillar trim panels.
For additional information, refer to C-Pillar Trim Panel C-Pillar Trim Panel
Remove both front seats.
For additional information, refer to Front Seat Removal and Replacement
For additional information, refer to Rear Seat Cushion Rear Seat Cushion





Torque to: 2 Nm













Vehicles with roof opening panel





NOTE:
Note the different lengths of screws.

NOTE:
Make sure that the component is installed to the position noted on removal.

Torque to: 2 Nm

Vehicles without roof opening panel





NOTE:
Note the different lengths of screws.

NOTE:
Make sure that the component is installed to the position noted on removal.

Torque to: 2 Nm

All vehicles













WARNING: This step requires the aid of another technician.





WARNING: This step requires the aid of another technician.

CAUTION: Note the fitted position of the component prior to removal.

CAUTION: Make sure that these components are installed to the noted removal position.





CAUTION: Note the fitted position of the component prior to removal.

NOTE:
Make sure that the component is installed to the position noted on removal.





WARNING: This step requires the aid of another technician.

Installation
1 To install, reverse the removal procedure.