Pinpoint Test G239843P26

PINPOINT TEST G239843p26 : U2019; VOICE ACTIVATED CONTROL MODULE (VACM) NOT RESPONDING

G239843t237 : CHECK VOICE CONTROL MODULE USING OPTICAL BUS TESTER
1. Connect the optical bus tester to the fibre optic lead connector DB04.
2. Set the optical bus tester to BY-PASS.
3. CLEAR the DTC.
4. Turn the ignition switch to the ACC position.
5. Wait for 10 seconds.
6. Check for "not responding" DTCs.

- Is U2019 set?

-> YES
For "wake-up" signal circuit tests, GO to Pinpoint Test G239843p5. Pinpoint Test G239843P5

-> NO
GO to Pinpoint Test G239843t238.

G239843t238 : CHECK FOR DTC U2602 OR U2603
1. Check DTCs.

- Are codes U2602 or U2603 logged?

-> YES
For optical ring tests, GO to Pinpoint Test G239843p29. Pinpoint Test G239843P29
and GO to Pinpoint Test G239843p30. Pinpoint Test G239843P30

-> NO
Recheck DTCs. No break in optical harness.