Folding Tray

Folding Tray

Removal
1. Open the folding tray.
2. Remove the folding tray latch assembly.







3. Detach the front seat backrest trim panel.
1. Detach the front seat backrest trim panel retaining clips.
2. Detach the front seat backrest trim panel.







4. Disconnect the rear passenger footwell courtesy lamp electrical connector.







5. Detach the front seat backrest trim panel retaining strap.







6. Remove the front seat backrest trim panel.







7. Detach the front seat backrest cover.







8. Detach the lumbar motor.







9. Remove the folding tray.







10. Remove the folding tray striker retaining screw cover.







11. Remove the folding tray striker.







12. NOTE: Left-hand shown, right-hand similar.

Remove the retaining bolt.







13. Remove the folding tray work surface.







14. Remove the folding tray finish panel.
- Remove the securing screws.







15. NOTE: The folding tray finish panel gaskets are handed.

Remove and discard the folding tray finish panel gasket.







Installation

1. NOTE: Install new folding tray finish panel gaskets.

To install, reverse the removal procedure.
- Tighten to 5 Nm.







2. Tighten to 2 Nm.







3. Tighten to 2 Nm.







4. Tighten to 1 Nm.