Door Lock Cylinder: Service and Repair

Front Door Lock Cylinder

Special Service Tools







Removal
1. Remove the front door exterior door handle.
2. Remove the front door lower security shield.







3. Detach the front door lock cylinder connecting rod from the front door lock actuator.







4. Remove the exterior door handle connecting rod retaining clip.







5. Detach the exterior door handle connecting rod from the front door lock actuator.







6. Remove the front door lock cylinder retaining screw.







7. Remove the exterior door handle gasket.







8. Using the special tool, remove the exterior door handle mechanism retaining screws.







9. Remove the exterior door handle mechanism.







10. Remove the front door upper security shield.







11. Remove the front door lock cylinder connecting rod.







12. Remove the front door lock cylinder.







Installation
1. To install, reverse the removal procedure.
1. Tighten to 7 Nm.







2. Using the special tool, tighten to 7 Nm.







3. Tighten to 7 Nm.







4. Tighten to 7 Nm.