Floor Console - Vehicles Without: Auxiliary Climate Control

Floor Console - Vehicles Without: Auxiliary Climate Control



This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary

Removal

All vehicles
1. Remove the transmission selector lever surround.







2. Remove the floor console front retaining bolts.







Vehicles fitted without heated rear seat
3. Detach the floor console register.







4. Disconnect the electrical connector.
- Detach the wiring harness retaining clip.







Vehicles fitted with heated rear seat
5. Detach the floor console register.







6. Disconnect the electrical connector.







All vehicles
7. Disconnect the electrical connector.







8. Remove the floor console register.
- Disconnect the electrical connector.







Vehicles fitted with heated rear seat
9. Remove the floor console register.
- Disconnect the electrical connector.







Vehicles with cordless cellular phone
10. Disconnect the Bluetooth module electrical connector.







All vehicles
11. Remove the floor console rear retaining bolts.







12. Raise the rear of the floor console.







13. Remove the floor console.







Installation

All vehicles

1. CAUTION:
- Make sure the seat belt buckles are not trapped when installing the floor console.
- Make sure the floor console locating tangs are correctly located into the instrument panel clips. Failure to follow this instruction my result in damage to the vehicle.

Install the floor console.







2. CAUTION: Make sure the seat belt buckles are not trapped when installing the floor console.

Lower the rear of the floor console.







3. Install the floor console retaining bolts.
- Tighten to 7 Nm.







Vehicles with cordless cellular phone
4. Connect the Bluetooth module electrical connector.







Vehicles fitted with heated rear seat
5. Install the floor console register.
- Connect the electrical connector.







All vehicles
6. Install the floor console register.
- Connect the electrical connector.







7. Connect the electrical connector.







Vehicles fitted with heated rear seat
8. Connect the electrical connector.







9. Install the floor console register.







Vehicles fitted without heated rear seat
10. Connect the electrical connector.
- Attach the wiring harness retaining clip.







11. Install the floor console register.







All vehicles
12. Install the floor console front retaining bolts.







13. Install the transmission selector lever surround.