C2305

PINPOINT TEST G256924p23: C2304, C2305; AIR SPRING SUPPLY CIRCUIT FAULT
G256924t67: CHECK THE LEFT-HAND FRONT AIR SPRING SUPPLY CIRCUIT FOR SHORT TO GROUND
1. Disconnect the left-hand front air spring electrical connector, EC47. 2. Measure the resistance between EC47, pin 01 (WR) and GROUND.
^ Is the resistance less than 10,000 ohms?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t68.

G256924t68: CHECK THE LEFT-HAND FRONT AIR SPRING SUPPLY CIRCUIT FOR SHORT TO B+
1. Measure the voltage between EC47, pin 01 (WR) and GROUND.
^ Is the voltage greater than 3 volts?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t69.

G256924t69: CHECK THE RIGHT-HAND FRONT AIR SPRING SUPPLY CIRCUIT FOR SHORT TO GROUND
1. Disconnect the right-hand front air spring electrical connector, EC12. 2. Measure the resistance between EC12, pin 01 (WU) and GROUND.
^ Is the resistance less than 10,000 ohms?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t7O.

G256924t70: CHECK THE RIGHT-HAND FRONT AIR SPRING SUPPLY CIRCUIT FOR SHORT TO B+
1. Measure the voltage between EC12, pin 01 (WU) and GROUND.
^ Is the voltage greater than 3 volts?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t7l.

G256924t71: CHECK THE LEFT-HAND REAR AIR SPRING SUPPLY CIRCUIT FOR SHORT TO GROUND
1. Disconnect the left-hand rear air spring electrical connector, TL33. 2. Measure the resistance between TL33, pin 01 (WG) and GROUND.
^ Is the resistance less than 10,000 ohms?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t72.

G256924t72: CHECK THE LEFT-HAND REAR AIR SPRING SUPPLY CIRCUIT FOR SHORT TO B+
1. Measure the voltage between TL33, pin 01 (WG) and GROUND.
^ Is the voltage greater than 3 volts?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t73.

G256924t73: CHECK THE RIGHT-HAND REAR AIR SPRING SUPPLY CIRCUIT FOR SHORT TO GROUND
1. Disconnect the right-hand rear air spring electrical connector, CR23. 2. Measure the resistance between CR23, pin 01 (WB) and GROUND.
^ Is the resistance less than 10,000 ohms?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
GO to Pinpoint Test G256924t74.

G256924t74: CHECK THE RIGHT-HAND REAR AIR SPRING SUPPLY CIRCUIT FOR SHORT TO B+
1. Measure the voltage between CR23, pin 01 (WB) and GROUND.
^ Is the voltage greater than 3 volts?
^ Yes
REPAIR the short circuit. For additional information, refer to the wiring diagrams. CLEAR the DTC. TEST the system for normal operation.
^ No
CHECK for DTC's indicating a air spring fault. Contact dealer technical support for confirmation of possible module failure, and/or raise an EPQR.