Front Seat

Front Seat (76.70.01)

Removal

1. Make the air bag supplemental restraint system (SRS) safe.

2. NOTE: Right-hand shown, left-hand similar.

Position the front seat fully forwards.
- Lower the front seat head restraint to the fully lowered position.







3. NOTE: Right-hand shown, left-hand similar.

Remove the safety belt lower anchor trim panel.







4. NOTE: Right-hand shown, left-hand similar.

Release the safety belt lower anchor from the front seat.







5. NOTE:
- Left-hand shown, right-hand similar.
- Some variation in the illustrations may occur, but the essential information is always correct.

Remove the 2 rear bolts from the front seat.







6. Position the front seat fully rearwards.

7. NOTE: Left-hand shown, right-hand similar.

Remove the 2 front bolts from the front seat.







8. Reposition the front seat to the central position.
9. Disconnect the battery ground cable.
10. Disconnect the front seat harness electrical connectors.
- Tilt the front seat rearwards to aid disconnecting the front seat electrical connectors.







11. NOTE:
- Make sure no damage is caused to the vehicle trim when removing the front seat.
- Left-hand shown, right-hand similar.

Remove the front seat.







Installation

1. To install, reverse the removal procedure.
- TORQUE: 47 Nm







2. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

TORQUE: 47 Nm







3. NOTE: Right-hand shown, left-hand similar.

TORQUE: 40 Nm