Removal and Replacement

Rear Door Window Regulator and Motor

Removal
1. Remove the rear door trim panel.
2. Detach the rear door wiring harness.
- Disconnect the rear door speaker electrical connector.







3. Detach the rear door wiring harness grommet.







4. Remove the rear door inner weather-shield retaining screw covers.







5. Remove the rear door inner weather-shield.







6. Power the rear door window glass to its fully open position.
7. Undo the rear door window glass retaining bolt.







8. Detach the rear door window glass from the window regulator.







9. Using suitable tape secure the rear door window glass in the fully closed position.







10. Disconnect the rear door window regulator and motor electrical connector.







11. Remove the rear door window regulator and motor.
- Remove the rear door window regulator and motor retaining bolts.







Installation
1. To install, reverse the removal procedure.
- Tighten to 7 Nm.







2. Tighten to 7 Nm.







3. NOTE: When the battery has been disconnected and connected the settings for the windows one touch facility and the anti-trap facility will have been erased.

Initialize the door window motors.