G189073T3

G189073t3: CHECK FOR KEY INTERLOCK FEED CIRCUIT FOR CONTINUITY
1. Disconnect the J-gate assembly electrical connector CA245.
2. Disconnect the ignition switch electrical connector FC018.
3. 3) Measure the resistance between the J-gate assembly electrical connector CA245 Pin 4(Y) and the ignition switch electrical connector FC018 Pin 3 (Y).
^ Is the resistance less than 5.0 Ohms?
- > Yes
- > No
Repair the electrical circuit between the J-gate assembly electrical connector CA245 Pin 4(Y) and the ignition switch electrical connector FC018 Pin 3 (Y). Clear the DTC. TEST the system for normal operation.