PINPOINT TEST G207085p6

PINPOINT TEST G207085p6 : DTC B2293: FLASH CODE 19: DRIVER AIR BAG/CLOCKSPRING MALFUNCTION

G207085t52 : CHECK THE DRIVER AIRBAG MODULE AND CIRCUIT USING SIMULATORS
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Disconnect the driver airbag electrical connectors, SW11 and SW12.
4. Connect a simulator to each connector.
5. Reconnect the battery negative terminal.
6. Turn the ignition switch to the ON position.
7. Allow the self-test to complete with the simulators installed.

- Does the self-test pass?

-> YES
INSTALL a new driver air bag module, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t53.

G207085t53 : CHECK THE DRIVER AIRBAG FIRST STAGE SIGNAL CIRCUIT THROUGH THE CLOCKSPRING FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Disconnect the clockspring electrical connector, SW08.
4. Measure the resistance between SW11, pin 01 (SB) and SW08, pin 10.

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t54.

G207085t54 : CHECK THE DRIVER AIRBAG FIRST STAGE SIGNAL CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between SW11, pin 01 (SB) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t55.

G207085t55 : CHECK THE DRIVER AIRBAG FIRST STAGE SIGNAL CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between SW11, pin 01 (SB) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t56.

G207085t56 : CHECK THE DRIVER AIRBAG FIRST STAGE RETURN CIRCUIT THROUGH THE CLOCKSPRING FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Measure the resistance between SW11, pin 02 (NR) and SW08, pin 09.

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t57.

G207085t57 : CHECK THE DRIVER AIRBAG FIRST STAGE RETURN CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between SW11, pin 02 (NR) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t58.

G207085t58 : CHECK THE DRIVER AIRBAG FIRST STAGE RETURN CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between SW11, pin 02 (NR) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t59.

G207085t59 : CHECK THE DRIVER AIRBAG SECOND STAGE SIGNAL CIRCUIT THROUGH THE CLOCKSPRING FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Measure the resistance between SW12, pin 01 (NB) and SW08, pin 02.

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t60.

G207085t60 : CHECK THE DRIVER AIRBAG SECOND STAGE SIGNAL CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between SW12, pin 01 (NB) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t61.

G207085t61 : CHECK THE DRIVER AIRBAG SECOND STAGE SIGNAL CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between SW12, pin 01 (NB) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t62.

G207085t62 : CHECK THE DRIVER AIRBAG SECOND STAGE RETURN CIRCUIT THROUGH THE CLOCKSPRING FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Measure the resistance between SW12, pin 02 (SW) and SW08, pin 01.

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t63.

G207085t63 : CHECK THE DRIVER AIRBAG SECOND STAGE RETURN CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between SW12, pin 02 (SW) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t64.

G207085t64 : CHECK THE DRIVER AIRBAG SECOND STAGE RETURN CIRCUIT THROUGH THE CLOCKSPRING FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between SW12, pin 02 (SW) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
INSTALL a new clockspring, CLEAR the DTC. TEST the system for normal operation.

-> NO
Contact dealer technical support for advice on possible RCM failure.