PINPOINT TEST G207085p14

PINPOINT TEST G207085p14 : DTC B2292: FLASH CODE 35: DRIVER SIDE REAR SEAT BELT PRETENSIONER MALFUNCTION

G207085t82 : CHECK THE DRIVER SIDE REAR SEAT BELT PRETENSIONER CIRCUIT FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Disconnect the driver side rear seat belt pretensioner electrical connector, CR64.
4. Disconnect the RCM electrical connector, CR87.
5. Measure the resistance between CR64, pin 02 (Y) and CR87, pin 35 (Y).

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new driver side rear seat belt pretensioner harness. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t83.

G207085t83 : CHECK THE DRIVER SIDE REAR SEAT BELT PRETENSIONER CIRCUIT FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between CR64, pin 02 (Y) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t84.

G207085t84 : CHECK THE DRIVER SIDE REAR SEAT BELT PRETENSIONER CIRCUIT FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between CR64, pin 02 (Y) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t85.

G207085t85 : CHECK THE DRIVER SIDE REAR SEAT BELT PRETENSIONER RETURN CIRCUIT FOR HIGH RESISTANCE
1. Measure the resistance between CR64, pin 01 (Y) and CR87, pin 34 (Y).

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new driver side rear seat belt pretensioner harness. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t86.

G207085t86 : CHECK THE DRIVER SIDE REAR SEAT BELT PRETENSIONER RETURN CIRCUIT FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between CR64, pin 01 (Y) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t87.

G207085t87 : CHECK THE DRIVER SIDE REAR SEAT BELT PRETENSIONER RETURN CIRCUIT FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between CR64, pin 01 (Y) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
INSTALL a new driver side rear seat belt pretensioner.