PINPOINT TEST G207085p12

PINPOINT TEST G207085p12 : DTC B2292: FLASH CODE 33: DRIVER SIDE SEAT BELT PRETENSIONER MALFUNCTION

G207085t70 : CHECK THE DRIVER SIDE SEAT BELT PRETENSIONER CIRCUIT FOR HIGH RESISTANCE
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Disconnect the driver seat belt pretensioner electrical connector, SD19.
4. Disconnect the RCM electrical connector, CR87.
5. Measure the resistance between SD19, pin 02 (GR) and CR87, pin 31 (GR).

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new driver side seat belt pretensioner harness. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t71.

G207085t71 : CHECK THE DRIVER SIDE SEAT BELT PRETENSIONER CIRCUIT FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between SD19, pin 02 (GR) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t72.

G207085t72 : CHECK THE DRIVER SIDE SEAT BELT PRETENSIONER CIRCUIT FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between SD19, pin 02 (GR) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t73.

G207085t73 : CHECK THE DRIVER SIDE SEAT BELT PRETENSIONER RETURN CIRCUIT FOR HIGH RESISTANCE
1. Measure the resistance between SD19, pin 01 (GU) and CR87, pin 32 (GU).

- Is the resistance greater than 5 ohms?

-> YES
INSTALL a new driver side seat belt pretensioner harness. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t74.

G207085t74 : CHECK THE DRIVER SIDE SEAT BELT PRETENSIONER RETURN CIRCUIT FOR SHORT TO GROUND
1. Reconnect the battery negative terminal.
2. Measure the resistance between SD19, pin 01 (GU) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
GO to Pinpoint Test G207085t75.

G207085t75 : CHECK THE DRIVER SIDE SEAT BELT PRETENSIONER RETURN CIRCUIT FOR SHORT TO HIGH VOLTAGE
1. Measure the voltage between SD19, pin 01 (GU) and GROUND.

- Is the voltage greater than 3 volts?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
INSTALL a new driver side seat belt pretensioner.