PINPOINT TEST G207085p1

PINPOINT TEST G207085p1: AIR BAG WARNING LAMP INOPERATIVE

G207085t1 : CHECK THE WARNING LAMP CIRCUIT FOR SHORT TO GROUND
1. Disconnect the battery negative terminal.
2. Wait one minute for the system to become safe.
3. Disconnect the restraints control module electrical connector, CR86.
4. Disconnect the instrument cluster electrical connector, IP05.
5. Measure the resistance between CR86, pin 01 (YU) and GROUND.

- Is the resistance less than 10,000 ohms?

-> YES
REPAIR the short circuit. CLEAR the DTC. TEST the system for normal operation.

-> NO
CHECK the warning lamp LED, replace as necessary. If the LED is good, contact dealer technical support for advice on possible RCM failure.