PINPOINT TEST G240073P5

Pinpoint Tests

PINPOINT TEST G240073p5 : DTC C1935: CHIME CIRCUIT TESTS

G240073t5 : CHECK THE CHIME CIRCUIT FOR OPEN CIRCUIT
1. Disconnect the battery negative terminal.
2. Disconnect the ACC module connector IP78.
3. Disconnect the chime module connector IP11.
4. Measure the resistance between the ACC module connector IP78, pin 06 (R) and chime module connector IP11, pin 03 (R).

- Is the resistance greater than 5 ohms?

-> Yes
REPAIR the open circuit. CLEAR the DTC. TEST the system for normal operation.

-> No
GO to Pinpoint Test G240073t10.

G240073t10 : CHECK THE CHIME CIRCUIT FOR SHORT CIRCUIT TO B+
1. Reconnect the battery negative terminal.