Symptom Chart

Symptom Chart

Refer to the Wiring Diagram manual for the connectors cited in the pinpoint tests.

Symptom Chart

The roof opening panel has excessive wind noise

Possible Source(s):
- Incorrect alignment.
- Roof opening panel weatherstrip.

Action(s) to take:
- GO to Pinpoint Test A.

The roof opening panel leaks

Possible Source(s):
- Incorrect alignment.
- Roof opening panel drain hoses.
- Roof opening panel weatherstrip.

Action(s) to take:
- GO to Pinpoint Test B.

The roof opening panel is noisy during operation

Possible Source(s):
- Roof opening panel glass.
- Roof opening panel frame.
- Roof opening panel motor.

Action(s) to take:
- GO to Pinpoint Test C.

The roof opening panel does not open or close

Possible Source(s):
- Roof opening panel frame.
- Roof opening panel motor.
- Rear electronics module (REM).
- Roof opening panel switch.
- Wiring harness.

Action(s) to take:
- GO to the Jaguar approved diagnostic system.

The roof opening panel does not open or close in vent position

Possible Source(s):
- Roof opening panel control module.
- Roof opening panel switch.
- Wiring harness.

Action(s) to take:
- GO to the Jaguar approved diagnostic system.

The roof opening panel does not stop flush from any position.

Possible Source(s):
- Roof opening panel alignment.
- Roof opening weatherstrip.
- Roof opening panel control module.

Action(s) to take:
- GO to Pinpoint Test D.

The 'one touch' open is inoperative

Possible Source(s):
- Roof opening panel control module.
- Roof opening panel switch.
- Motor synchronization.

Action(s) to take:
- GO to the Jaguar approved diagnostic system.