Rear Door Lock Actuator

Rear Door Lock Actuator

Removal
1. Remove the rear door trim panel.
2. Disconnect the door speaker electrical connector.







3. Detach the door wiring harness.







4. Detach the door wiring harness grommet.







5. Remove the door inner weathershield.







6. Remove the exterior door handle connecting rod retaining clip.







7. Detach the exterior door handle connecting rod from the front door lock actuator.







8. Remove the rear door lock actuator retaining screws.







9. Reposition the rear door lock actuator and actuator remote cable assembly.
10. Remove the rear door lock actuator and actuator remote cable assembly.
- Disconnect the electrical connectors.







11. Remove the actuator remote cable from the rear door lock actuator.
1. Detach the actuator remote outer cable.
2. Remove the actuator remote cable from the rear door lock actuator.







Installation
1. To install, reverse the removal procedure.
- Tighten to 7 Nm.