Over Head Console With / Without Sun Roof

Overhead Console

Removal

Vehicles without roof opening panel







1. Remove the retaining screw.
- Open the sunglasses compartment.

All vehicles







1. Detach the overhead console from bulb carrier retaining clips.
1. Release the overhead console to bulb carrier front retaining clips.
- Release the overhead console to bulb carrier side retaining clips. Lower the overhead console.







2. Remove the overhead console.
- Disconnect the electrical connector.

Installation

All vehicles







1. Release the overhead console clips to aid correct installation of the overhead console to the headlining.

NOTE: Do not remove the sunglasses housing from the overhead console.







2. Connect the electrical connector.







3. Install the overhead console.

NOTE:
- Make sure the headlining is correctly located in to the overhead console.
- Make sure the overhead console clips engage in the sunglasses housing.

Vehicles without roof opening panel







1. Fit the retaining screw.