Floor Console

76.25.01

Floor Console







1. Remove the transmission selector lever surround.







2. Remove the floor console front retaining bolts.







3. Detach the floor console register.







4. Disconnect the electrical connector.
- Detach the wiring harness retaining clip.







5. Disconnect the electrical connector.







6. Remove the floor console register.
- Disconnect the electrical connector.







7. Remove the floor console rear retaining bolts.







8. Raise the rear of the floor console.







9. Remove the floor console.

Installation







1. Install the floor console.

CAUTION: Make sure the floor console locating tangs are correctly located into the instrument panel clips.







2. Lower the rear of the floor console.







3. Install the floor console retaining bolts.
- Tighten to 7 Nm.







4. Install the floor console register.
- Connect the electrical connector.







5. Connect the electrical connector.







6. Connect the electrical connector.
- Refit the wiring harness retaining clip







7. Attach the floor console register.







8. Install the floor console front retaining bolts.
- Tighten to 7 Nm.







9. Install the transmission selector lever surround.