Auxiliary Front Crossmember

Auxiliary Front Crossmember

Removal

NOTE:
- This is a category 'B' repair.
- In this procedure the auxiliary front crossmember is replaced in conjunction with the:
- front bumper cover

1. Before commencing this procedure ensure that you are aware of all Health and Safety requirements.
2. Remove the front bumper cover
3. Remove the fan cowl.
4. Remove four 10mm bolts, 2 each side, to the side member deformation element and remove the panel.







Installation

1. Offer up new panel, align and secure using the four 10mm bolts, 2 each side. Tighten the bolts to 25 Nm (18 lb.ft).
2. Install is the reversal of removal.