Luggage Compartment Lid Latch Actuator - VIN Range: G00442->H18679

Luggage Compartment Lid Latch Actuator - VIN Range: G00442->H18679



This is a "Trustmark Authoring Standards (TAS) Repair Procedure"
- TAS style procedures can be identified by steps that have no accompanying step text and the magenta color of the electrical connectors and fasteners such as nuts, bolts, clamps or clips.
- TAS removal and installation procedures use a sequence of color illustrations to indicate the order to be followed when removing/disassembling or installing/assembling a component.
- Many of the TAS procedures will have the installation information within the removal steps.
- The TAS color illustrations use a variety of symbols to indicate important details of the procedures. It is important to understand these symbols in order to properly used the TAS procedures.
Refer to How to Use TAS Procedures and TAS Symbol Glossary at Vehicle | Description and Operation for additional information on these TAS procedures.
For additional information, refer to How to Use TAS Procedures How to Use TAS Procedures
For additional information, refer to TAS Symbol Glossary TAS Symbols Glossary

Removal
1. Release the warning triangle retaining clip.







2. Remove the warning triangle.







3. Remove the warning triangle retaining bracket.







4. Remove the luggage compartment lid grab handles.







5. Remove the luggage compartment lid latch trim cover.







6. Detach the luggage compartment lid courtesy lamp.







7. Remove the luggage compartment lid courtesy lamp.
- Disconnect the luggage compartment lid courtesy lamp electrical connector.







8. Remove the luggage compartment lid liner.







9. Detach the luggage compartment lid latch actuator electrical connector.







10. Disconnect the luggage compartment lid latch actuator electrical connector.







11. Remove the luggage compartment lid latch actuator retaining bolts.







12. Detach the luggage compartment lid latch actuator.







13. Remove the luggage compartment lid latch actuator.
1. Detach the luggage compartment lid latch actuator release cable.
2. Remove the luggage compartment lid latch actuator release cable.
3. Remove the luggage compartment lid latch actuator.







Installation
1. To install, reverse the removal procedure.
- Tighten to 15 Nm.