Battery Cable: Service and Repair

Battery Cables - 2.0L/2.5L/3.0L (86.15.32)

Removal

1. Disconnect the battery.
2. Detach the battery junction box positive cable.
- Remove the retaining nut.







3. Remove the battery.
4. Remove the battery tray.







5. Detach the battery ground cable.
- Remove the retaining bolt.







6. Remove the battery ground cable.
- Remove the retaining bolt.







7. Detach the battery to starter motor solenoid cable cover.







8. Remove the battery to starter motor solenoid cable.
- Remove the retaining nut.







9. Remove the air cleaner assembly.
10. Detach the wiring harness.







11. Detach the wiring harness.







12. Remove the air filter retaining bracket.
- Remove the retaining nuts.







13. Detach the generator battery positive cable protective cover.







14. Remove the battery positive cable.
- Detach the generator battery positive cable electrical connector.
- Remove the retaining nut.







Installation

1. To install, reverse the removal procedure.
- Tighten to 12 Nm.







2. Tighten to 6 Nm.







3. Tighten to 12 Nm.







4. Tighten to 25 Nm.







5. Tighten to 25 Nm.







6. Tighten to 4 Nm.