Fuel Rail: Service and Repair

Fuel Injection Supply Manifold (19.60.13)

Removal

All vehicles

1. Disconnect the battery ground cable.
2. Disconnect the spring lock coupling.

Vehicles with 2.5L or 3.0L engine

3. Remove the fuel injectors.

Vehicles with 2.5L or 3.0L engine

10. Remove the fuel pressure sensor.
- Remove and discard the gasket.







Installation

All vehicles

NOTE: Install new fuel injector O-ring seals.

1. To install, reverse the removal procedure.
- Lubricate the fuel injector O-ring seals with clean engine oil.

Vehicles with 2.5L or 3.0L engine

NOTE: Install a new gasket.

2. Tighten to 10 Nm.