Rear Toe Adjustment

Rear Toe Adjustment (57.65.08)

NOTE: The checking and subsequent adjustment of the rear toe setting should be carried out on a flat surface and in accordance with the manufactures instructions for the wheel alignment equipment used.

1. NOTE: Final tightening of the rear suspension components should be carried out when the vehicle weight is on the road wheels.

Using suitable four wheel alignment equipment, check the toe setting.
2. Raise and support the vehicle.

3. NOTE: Left-hand shown, right-hand similar.

Loosen the rear lower arm cam bolt nuts.





4. Rotate the cam bolts equal amounts, in either a clockwise or a counterclockwise direction, to adjust the toe setting.





5. CAUTION: The final tightening of the suspension components should be carried out with the vehicle on its wheels. Failure to follow this instruction may result in damage to the vehicle.

NOTE: Left-hand shown, right-hand similar.

Tighten the rear lower arm cam bolt nuts.





6. Lower the vehicle.
^ Bounce the vehicle to make sure that the suspension is in its normal resting position.

7. NOTE: Left-hand shown, right-hand similar.

Tighten the rear lower arm cam bolt nuts.
^ Tighten to 115 Nm.